PRODUCT | CONTEC
DIO-3232L-PE
●Opto-coupler isolated input (supporting current sink output) and opto-coupler isolated open-collector output (current sink type)
●Opto-coupler bus isolation
●You can use all of the input signals as interrupt request signals.
●This product has a digital filter to prevent input signals from carrying noise or a chattering.
●The output circuit, has a built-in Zener diode and the overcurrent protection circuit of the surge voltage protection.
●Windows/Linux compatible driver libraries are attached.
DO-32L-PE
●Opto-coupler isolated input (supporting current sink output) and opto-coupler isolated open-collector output (current sink type)
●Opto-coupler bus isolation
●You can use all of the input signals as interrupt events.
●Windows/Linux compatible driver libraries are attached.
●This product has a digital filter to prevent input signals from carrying noise or a chattering.
●Output circuits include zener diodes for surge voltage protection and overcurrent protection circuit.
DIO-1616T-LPE
●Unisolated open collector output x 16 channels. Unisolated TTL-level (positive logic) input/output enabling fast response (within 200nsec)
●You can use all of the input signals as interrupt events and also disable or enable the interrupt in bit units and select the interrupt edge.
●The rated output signal is up to 30VDC, 40mA per one signal.
●Support for both of low-profile and standard size slots (interchangeable with a bundled bracket)
●Equipped with the same function as the PCI card PIO-16/16T(LPCI)H. The connector shape and the signal assignment for the connector is compatible with PIO-16/16T(LPCI)H
DIO-1616L-PE
●Opto-coupler isolated input (supporting current sink output) and opto-coupler isolated open-collector output (current sink type)
●Opto-coupler bus isolation
●You can use all of the input signals as interrupt events.
●Windows/Linux compatible driver libraries are attached.
●This product has a digital filter to prevent input signals from carrying noise or a chattering.
●Output circuits include zener diodes for surge voltage protection and overcurrent protection circuit.
PIO-16/16L(PCI)H
h_01_rgb_96dpi_500x500.jpg)
● Because of the common composition of a 16-point unit, each common line can respond to a different external power supply.
● Since the PCI bus (personal computer) and the input/output interface are isolated by the photo-coupler, it excels in noise-protection nature.
● All the input signals can be used as an interruption input. Moreover, the edge of the input signal can also generates interruption.
● It has the digital filter function for preventing the incorrect input by the noise or the chatering.
● The rating of an output signal is a maximum of 35 VDC and 100mA per point. The zener diode is connected to the output transistor for protection from surge voltage. Moreover, the over-current protection element is attached per eight output transistors.
● PIO-16/16L(PCI)H, and PIO-16/16L(PCI) are connector pin compatibles.
PIO-32/32L(PCI)H
h_rgb_96dpi_500x500.jpg)
● The input of a maximum of 32 points and the output of a maximum of 32 points can be performed on this one board. Because of the common composition of a 16-point unit, each common line can respond to a different external power supply.
● Since the PCI bus (personal computer) and the input/output interface are isolated by the photo-coupler, it excels in noise-protection nature.
● It can interrupt and 32 points of an input signal can be used as an input. Moreover, the edge of the input signal can also generates interruption.
● It has the digital filter function for preventing the incorrect input by the noise or the chatering.
● The rating of an output signal is a maximum of 35 VDC and 100mA per point. Zener diode is connected to an output transistor for protection from surge voltage. Moreover, the over-current protection element is attached per eight output transistors.
● PIO-32/32L(PCI)H, and PIO-32/32L(PCI) are connector pin compatibles.
CM-64L
● Signal monitoring LED provide for every point.
● Capable of generating switch-operated signals for all points.
● Capable of checking digital I/O board/card operation without any external device connected.
● Capable of checking operation of an independent external device.
● Capable of supplying external power from this product if connected to an insulated digital I/O board/card.
● Mountable on a 35-mm DIN rail using the DIN rail mounting adapter "DIN-ADP1" (separately priced).